HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 1
Model: HT903TA(HT903TA-A2, SH93TA-S/C/W)
Full HD up-scaling
(1080p)
5.1ch ez Set-up
View Full HD picture quality Listen sound from TV, DVD
Unique Features
with simple setup.
and Digital Device with vivid
5.1ch mode.
Go to page 10
Go to page 15
USB Direct Recording
Portable In
Record music from CD to
your USB device.
Listen to music from your
portable device (MP3,
Notebook, etc).
P/NO : MFL42932926
Go to page 17
Go to page 17
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 3
Welcome to your new DVD Receiver
Contents
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . .5-6
What is SIMPLINK?
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OSD Initial language settings . . . . . . . . . . . . . . . . . . .9
Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .9
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . .9-11
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .11
Displaying Disc Information . . . . . . . . . . . . . . . . . . .12
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .12-14
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .14
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .15
5.1ch ez Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Listening to music from your USB device . . . . . . . . .16
Recording music from CD to your USB device . . . . .17
Listening to music from your portable player . . . . . . .17
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
•
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
•
•
•
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV with SIMPLINK function has the logo as shown above.
Use a higher version cable than 1.2A HDMI cable.
3
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 4
Setting up
The speakers are detached from the speaker stands.
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
the colour coding:
COLOUR SPEAKER
POSITION
Grey
Rear
Behind you and to your right.
Assembling the Speakers
Blue
Rear
Behind you and to your left.
1 Draw the speaker cord through the hole on the speaker.
Green
Orange
Red
Centre
Sub Woofer
Front
Above screen, directly in front of you.
2 Attach the speakers to the speaker stands by rotating the screw.
Attaching the speakers to the DVD receiver
In front of you, to the right of
the screen.
In front of you, to the left of
the screen.
a
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
White
Front
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
b
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection termi-
nal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Be careful of the following
Be careful to make sure children do not put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabi-
net(enclosure).
Do not fix the speaker cables in the hole on the speakers
4
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 5
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Audio In connection
Video Out connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one input for audio (mono),
connect it to the left (white)
audio jack on the unit.
Connect the VIDEO OUT-
PUT jack on the unit to the
corresponding input jack on
your TV using a Video cable.
AM/FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Component Video connection
Connect the COMPO-
NENT/PROGRESSIVE
SCAN OUTPUT jacks on the
unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
b Plug the power cord into the power source.
5
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 6
Hooking up the unit
Hooking up the unit - more you
can do
HDMI Out connection
Connect the HDMI OUTPUT jack
on the unit to the HDMI input jack
on a HDMI compatible TV using a
HDMI cable.
Resolution Setting
You can change the resolution for component video
and HDMI output.
To change the resolution using setup menu to select
the desired resolution - Auto, 480i(576i), 480p(576p),
720p, 1080i, 1080p.
Available resolution according to connection
[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or
576p)
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i
(or 576i)
[VIDEO OUT]: 480i (or 576i)
Notes on HDMI Out connection
•
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Use the HDMI cable within 5 meters
If the volume bar is not displayed on TV screen,
when you select Simplink to off on TV, restart the
unit.
•
•
Enjoying audio from an external source
You can enjoy audio from an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, PORTABLE, USB
Digital Audio in connection
Connect the unit’s OPTICAL
IN jack to the optical out to
jack on your TV (or Digital
Devicae etc.)
6
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 7
Remote control
VSM : Press VSM to set the Dolby Pro Logic II or VIRTU-
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
AL sound.
INPUT : Changes the input source
PORTABLE, USB
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
(
AUX, AUX OPT,
REPEAT: Repeats a Chapter/ Track/ Title/ all.
SUBTITLE: During playback ,SUBTITLE repeatedly to
select a desired subtitle language .
)
a
b
c
d
0-9 numerical buttons: Selects numbered options in a
menu.
POWER: Switches the unit ON or OFF.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ e ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
FUNCTION : Selects the function (DVD/CD FM, AM)
,
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may not
appear.
TV Control buttons : Controls the TV. (LG TV only)
PROG./MEMO. : Accesses or removes Program menu.
CLEAR: Removes a track number on the Program List.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ f ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
ECHO VOL. : Adjusts echo volume.
MIC VOL. : Adjusts microphone volume.
VOCAL FADER : You can enjoy the function as karaoke,
by reducing singer vocal of music in the various source.
(MP3/WMA/CD/DD etc.) except for Karaoke mode.
DISPLAY: Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
PRESET(v/V): Selects programme of Radio.
TUN.(-/+): Tunes in the desired radio station.
b / B / v / V (left/right/up/down):Used to navigate on-
screen displays.
ENTER : Acknowledges menu selection.
RETURN (O): Press to move back wards in the menu.
REC (z) : USB Direct Recording
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
STOP (x): Stops playback or recording.
PLAY (B): Starts playback. Mono/Stereo(St.)
PAUSE/STEP (X): Pause playback
SKIP(. / >): Go to next or previous chapter/ track.
Put the batteries into the remote control
Make sure that the + (plus) and – (minus) on the batter-
ies match those on the remote control.
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR (+/–) button repeatedly until the TV turns
on or off.
SCAN(bb/BB) : Search backward or forward.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
TVtHT SPK (5.1Ch Ez Set-Up ): Press HT SPK to select
the AUX OPT directly
e
f
MUTE : Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.
VOLUME (+/-) : Adjusts speaker volume.
EQ : You can choose 6 (or 7) fixed sound impressions.
7
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 8
Main Unit
Open/Close
Play/Pause, Function
DVD/CD Disc Drawer
Press and hold down this button for
about 3 seconds then press repeat-
edly to select other function.
PORT. IN port
The PORT. In port means you can connect
an audio device to play trough the surround
sound speakers.
Stop
Tuning (-/+)
Skip / Search
USB port
The USB port allows you can connect a
memory device to your DVD player.
VSM
Selects the Dolby Pro Logic II
or Virtual sound.
Power
Turn the unit on and off.
MIC 1/MIC 2
Volume
Connect a microphone to MIC 1 or MIC 2 to both sockets.
Control the volume when using any function.
8
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 9
Adjust the settings
OSD Initial language settings
Before using the unit for the first time, you have to adjust OSD initial
language
ON REMOTE
1 Display setup menu :
SETUP
v V
ON REMOTE
2 Select a desired option on the first level:
3 Move to second level:
1 Turn the power on:
B
Appear the language list display window
2 Select the language:
3 Press:
POWER
4 Select a desired option on the second level: v V
vV b B
5 Move to third level:
6 Change the setting:
B
ENTER
v V, ENTER
4 To confirm press:
b B and ENTER
Adjust the settings - more you can do
Initial Setting the Area Code
Adjust the language settings
After factory setting ,To set the Area code you have to as below.
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD.
ON REMOTE
1 Display setup menu:
SETUP
- Restart the unit
- Change function
- Disconnect and connect USB device.
2 Select LOCK menu on the first level:
v V
3 Move to second level:
Appears the activated Area code on the
second level.:
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 18). If you make a mistake before pressing
ENTER, press CLEAR.
B
B
4 Move to thirdlevel:
5 Enter the new pass word:
numerical buttons
(0-9) and ENTER
[OFF] (for Disc Subtitle): Turn off Subtitle.
6 Recheck entered new pass word:
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area:
After select,Rating and Passward will be
activated.(page18)
vV b B
8 To confirm press:
ENTER
9
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 10
• If you turn off the TV or disconnect the HDMI cable during playback of the
device, playback will pause. You have to click on the play button to play back
again. For some TVs, when you change the TV mode, such condition speci-
fied above may happen.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Adjust the audio settings
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier’s output.
[Speaker]: Select a speaker that you want to adjust.
[Size]: Since the speaker settings are fixed, you cannot change the settings.
[Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB)
[Distance]: If you connected speakers to your DVD/CD Receiver, setting the
Distance lets the speakers know how far the sound has to travel to reach
your set listening point. This allows the sound from each speaker to reach
the listener at the same time.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Video Resolution - Use vV to select the desired resolution then press ENTER
to confirm your selection.
You can set 1080p video resolution to enjoy Full HD picture quality.
(Full HD up-scaling)
Press b / B to adjust the Distance of the selected speaker. (You can’t adjust
front / Woofer speakers)
The number in 480p (or 576p), 720p, 1080p and 1080i indicates the number of
lines of video. The “i” and “p” indicate interlaced and progressive scan, respec-
tively.
[Test]: Press b / B to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
[Auto] If your HDMI jack is connected to TVs providing display information
(EDID), automatically selects the resolution best suited to the connected TV
(1080p, 1080i, 720p or 480p (or 576p)). (only for HDMI connection)
[1080p] Outputs 1080 lines of progressive video. (only for HDMI connection)
[1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection)
[720p] Outputs 720 lines of progressive video.(only for HDMI connection)
[480p (or 576p)] Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)] Outputs 480 (or 576) lines of interlaced video.
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV
to scroll up and down through the delay amount, which you can set at anything
between 0 and 300m sec.
Notes on Video Resolution
• Only resolutions supported by the TV are available.
• Depending on your TV, certain HDMI output resolutions may not work.
• If your TV does not accept your resolution setting, an abnormal picture
appears on the screen. Please read TV’s owner’s manual then set the resolu-
tion that your TV can accept.
The delay will vary depending on which digital TV channel you are on. If you
change channel you may need to readjust the HD AV Sync.
• If the HDMI jack is connected for TVs providing display information (EDID),
you can not select resolutions that the TV does not accept.
• If the picture does not appear on the screen, change the TV’s input source.
10
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 11
Adjust the lock settings
Setting the sound mode
VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
You can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the vir-
tual sound or to change sound mode repeatedly.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
2Ch source
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows
and all programs encoded in Dolby Surround. The result is enhanced sound
field directionality that approaches the quality of discrete 5.1-channel sound.
[PL II MUSIC] mode: The Music mode is for use with any stereo music
recordings.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode
except that the directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations from poor FM stereo
reception can otherwise cause disturbing surround signals from a logic
decoder. The ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 18.
Adjust the others settings
PBC (Playback Control) – Playback control provides special navigation fea-
tures that are available on some Video CDs. Select [On] to use this feature.
[ON STAGE] mode: Simulates a large Concert hall
DivX(R) Registration – We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service.
Press ENTER when [Select] icon is highlighted and you can view the registra-
tion code of the unit.
[VIRTUAL] mode: Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers. Listeners may expe-
rience amazing virtual surround effects with their own multimedia play-
ers.
5.1Ch source
[VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that
you listen to the sound simultaneously from the right and left speakers
and center speaker.
Semi Karaoke – When a chapter / title / track is fully finished ,this function
shows the score in the screen with a fanfare sound.
Available discs for the Semi Karaoke function: DVD discs / DVD Karaoke Discs
/ VCD discs with more than 2 tracks
[On]: When you finished singing a score will appear on the screen.
[Off]: Fanfare and score do not appears on the screen.
Set a pre-programmed sound field
This system has a number of pre-set surround sound fields. Select the one
which best suits the programme you are watching by pressing EQ repeatedly to
cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,
ROCK, JAZZ
- DVD ,DVD Karaoke ,VCD discs with more than 2 tracks
- This function operate on the DVD/CD mode.
- The Semi Karaoke function is available only when a microphone is connected.
- When you watching movies, “off ” the Semi Karaoke at the SETUP menu or
enjoy it without connecting the MIC if the fanfare or score appears during
changing a chapter.
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal
EQ regardless of Tag information.
Bit Rate – You can set the quality of the recorded file.
11
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 12
Displaying Disc Information
Playing a Disc or file
ON REMOTE
ON REMOTE
1 Open the disc tray: (On unit: Z)
2 Insert a Disc: (On unit)
-
-
-
1 Press DISPLAY:
DISPLAY
v V
2 Select a item:
3 Close the disc tray: (On unit: Z)
3 Adjust the Display menu settings:
4 To return the exit:
b B
4 Adjust the menu settings:
or Select a file from the menu:
vV b B
v V
DISPLAY
5 Start the Disc playing:
B
PLAY
STOP
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
6 To stop the Disc playing:
x
pressing b B.
Playing a Disc or file - more you can do
1/6
Current title (or track)
number/total number of titles (or tracks)
Current chapter number/total number of chapters
DVD
VCD
Playing a DVD or Video CD that has a menu
4/26
Most DVD or Video CD now have menus which load first before the film begins
to play. You can navigate these menus using vV b B to highlight an option.
Press ENTER to select.
Elapsed playing time
Selected audio language or channel
1
ENG
D
3/2.1CH
1
KOR
1/3
Selected subtitle
Selected angle/total number of angles
ALL
Skip to the next/previous chapter/track
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
Selected sound mode
Symbol Used in this Manual
ALL
Pause playback
ALL
MP3
WMA
DivX
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-
back.
All discs and file listed below
DVD and finalized DVD R/RW
Video CDs
MP3 files
DVD
VCD
ACD
WMA files
DivX files
DVD
DivX
VCD
Frame-by-Frame playback
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
Audio CDs
ALL
Playing repeatedly
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [OFF]. This function does not operate dur-
ing Video CD playback, change the PBC to OFF on setup menu.
12
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 13
ALL
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG
Fast forward or fast reverse
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and
JPEG files together, you can select which menu of files you would like to play
by pressing TITLE
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M) repeated-
ly. Press PLAY (B) to continue play at normal speed.
®
DVD
DivX
Selecting a subtitle language
DivX
Changing the character set to display DivX subtitle correctly
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle
language.
If the subtitle does not display properly during playback, press and hold SUBTI-
TLE for about 3 seconds then press SUBTITLE to select another language
code until the subtitle is displayed properly
DVD
VCD
Slow down the playing speed
DivX
DivX file requirement
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed. The video CD cannot be slow down reverse playback.
DivX disc compatibility with this player is limited as follows:
Available resolution size: 800x600 (W x H) pixel
The file name of the DivX subtitle is available by 45 characters.
If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
•
•
•
DVD
VCD
ACD
MP3
WMA
Watch and listen 1.5 times faster
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5
times faster than normal playback speed. B x1.5 will appear in the top right cor-
ner of the screen. Press PLAY again to return to normal playback speed.
•
•
•
If the number of the screen frame is over 30 per 1 second, this unit may not
operate normally.
If the video and audio structure of recorded files are not interleaved, either
video or audio is outputted.
If the name of movie file is different from that of the subtitle file,during play-
back of a DivX file, subtitle may not be display..
DVD
Viewing the Title menu
Press TITLE to display the disc's title menu, if available.
•
•
MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
DVD
Viewing the DVD MENU
Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub)
SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt)
(Files (VobSub(.sub)) included with USB device is not supported)
Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”
Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”
Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
CD-R/RW, DVD R/RW Format: ISO 9660
Press MENU to display the disc menu, if available.
DVD
DivX
VCD
Starting play from selected time
•
•
•
•
•
•
Searches for the starting point of entered time code. Press DISPLAY during
playback and select the time clock icon. Input the required start time in hours,
minutes, and seconds, and press ENTER. If you enter the wrong number, press
CLEAR to enter again.
DVD
Last Scene Memory
Maximum Files/Disc: Less than 999 (total number of files and folders)
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
13
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 14
ACD
MP3
WMA
Creating your own program
Viewing photo files
You can play the contents of a disc in the order you want by arranging the order
of the music files on the disc. The program is cleared when the disc is removed.
ON REMOTE
Select a desired music file then press PROG./MEMO. or select “
press ENTER to add the music file to the program list. To add all music files on
the disc, select “ ” and then press ENTER. Select a music file from the pro-
“ and then
1 Open the disc tray: (On unit: Z)
2 Insert a disc: (On unit)
-
-
gram list then press ENTER to start programmed playback.To clear a music file
from the program list, select the music file you want to clear then press CLEAR
3 Close the disc tray: (On unit: Z)
4 Select a photo file:
-
v V
or select “
program list, select "
icon and then press ENTER. To clear all music files from the
”
5 Display the selected file in full screen:
6 To return to the menu:
ENTER
" then press ENTER.
x
STOP
MP3
Displaying file information (ID3 TAG )
While playing an MP3 file containing file information, you can display the infor-
mation by pressing DISPLAY repeatedly.
Viewing photo files - more you can do
Viewing photo files as a slide show
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”.
Use vV b B to highlight (
You can change slide show speed using b B when (
) icon then press ENTER to start slide show.
) icon is highlighted.
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• CD-R/RW, DVD R/RW Format: ISO 9660
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
• Maximum Files/Disc: Less than 999 (total number of files and folders)
Rotate a photo
Screen Saver
Use vV b B to rotate the photo in full screen mode.
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the
slide show.
System Select
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more than
five seconds to be able to select a system
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 2MB recommended
• CD-R/RW, DVD R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 999 (total number of files and folders)
VOCAL FADER
You can enjoy the function as karaoke, by rducing singer vocal of music in the
various source.( MP3/WMA/CD/ DTS/DD etc.) except for Karaoke mode.
- This function available to use only when a microphone is connected.
Press VOCAL FADER button then you can see “FADE ON”or “FADE OFF” on
the front display.
- This function supports for 2 channel or more.
14
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 15
5.1ch ez Set-up
Listening to the radio
Be sure that both FM and AM aerials are connected.
Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode.
Even in power off mode, if you press TVtHT SPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
1 Turn the power on:
POWER
FUNCTION
TUN-/+
2 Select either FM or AM:
3 Select a radio station:
4 To ‘save’ a radio station:
A preset number will show in the display.
PROG/MEMO.
5 To select a ‘saved’ station input the preset
number:
Up to 50 radio stations can be saved.
PRESET v/V
6 To confirm press:
PROG/MEMO.
ON REMOTE
1 Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).:
Listening to the radio - more you can do
-
Look for radio stations automatically
2 Select the AUX OPT:
To select the AUX OPT directly
TV
-
tHT SPK
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-
matically and stop when it finds a radio station.
3 Listen sound with 5.1ch speaker.:
4 To escape from AUX OPT:
Choose a preset number for a radio station
FUNCTION or INPUT
When storing a radio station, the preset number can be chosen. When the play-
er automatically shows a preset number, press PRESET v/V to change it.
Press PROG./MEMO. to save your chosen number.
Delete all the saved stations
Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the
DVD receiver display. Press PROG./MEMO. to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono
and usually improve the reception.
15
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 16
Listening to music from your USB device -
more you can do
Listening to music from your
USB device
The advantage of connecting your portable USB player through the sys-
tem’s USB port is that the USB device can be controlled from the system.
Compatible USB Devices
•
•
•
Devices which require additional program installation when you have con-
nected it to a computer, are not supported.
MP3 Player : Flash type MP3 player.
The MP3 player requiring installation of a driver is not supported.
USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0
is inserted in the the player, if operates at the same speed
as that of USB 1.1)
USB device requirement
•
•
•
Do not extract the USB device while in operation.
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device might not be
recognized.
•
A device using NTFS file system is not supported. (Only FAT (16/32) file sys-
tem is supported.)
ON REMOTE
•
•
•
•
The USB function of this unit does not support all USB devices.
Digital camera and mobile phone are not supported.
This unit is not supported when the total number of files is 1000 or more.
If the connected USB device has two or more folders, a drive folder is dis-
played on the screen. If you want to move to the previous menu after you
select a folder, press RETURN.
1 Connect the USB device to the unit
using a USB cable (not supplied).:
-
2 Select the USB function:
INPUT
v V
B
3 Select a file from the menu:
4 Start your music playing:
5 Before disconnecting the portable USB
device, change to any other function by
pressing:
FUNCTION or INPUT
-
6 Remove the USB device:
16
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 17
•
If the USB can not record appears “NO USB”.“ERROR”,“USB FULL” ,
“NO REC” on the display window.
File will be stored to CD_REC folder in a format “TRK-001.mp3”.
In the state CD-G ,DTS disc USB Record is not operated.
If you record more 999 files on CD_REC folder appears “ERROR” on the
display.
New files are numbered in numeric sequence. if the total number of the files
are more than 999, delete some or store some in PC.
External HDD,Card reader, Locked device and MP3 player is not supported.
Recording music from CD to
your USB device
ON REMOTE
•
•
•
1 Connect the USB device to the unit:
-
•
2 Select a mode (DVD/CD) in which you want
to record:
FUNCTION
•
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This equip-
ment should not be used for such purposes.
3 Start the recording:
z
If you want to record desired music file in
Disc to USB. Select a file after start the
recording:
v V and z
Be responsible Respect copyrights
4 To stop a recording:
x
STOP
Listening to music from your
portable player
The player can be used to play the music from many types of portable
player
Recording music from CD to your USB
device - more you can do
Record Audio CD source to USB
One track recording - If the USB recording is played during playback of the
CD, the only track would be recording into the USB
All track recording - If the REC button is pressed at the CD stop, all track
would be recording.
Program list recording - USB Records after selecting the tracks pressing the
PROG./MEMO. button if you want to record the track you want.
When you are recording, look out for the following
•
When you start the USB direct recording ,you can check the Recording per-
centage rate for the USB record on the display window during the recording.
During the recording is no sound and not operate for volume .
When you stop recording during playback ,the file that has been recorded at
that time will be stored
•
•
ON REMOTE
•
If you disconnect the USB without STOP button while recording ,the file can
not delete in the PC.
It is impossible to record from “ MIC IN”
Playable USB REC. Bit rate : 96/128kbps (Refer to the SET UP page)
During USB record can not operate Pause key for Audio CD only.
Card reader device can not be use for USB record.
USB port of the unit can not be connected to PC. The unit can not be used
as a storage device.
1 Connect the portable player by plugging the
unit into PORT. IN on the front of the player.:
•
•
•
•
•
-
2 Turn the power on:
POWER
INPUT
3 Select the PORTABLE function:
4 Turn the portable player on and start it
playing:
-
17
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 18
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Italian
Ukrainian
Urdu
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Bulgarian
Burmese
Byelorussian
Chinese
Latvian, Lettish
Area Codes
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
Area
Code
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
Area
Code
Area
Code
LK
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
GL
HK
HU
IN
ID
IL
MV
MX
MC
MN
MA
NP
NL
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
PY
PH
PL
PT
RO
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
IT
SA
SN
SG
SK
SI
ZA
KR
ES
Uganda
Ukraine
Brazil
JM
JP
KE
KW
LY
LU
MY
Cambodia
Canada
Chile
China
Colombia
Congo
NZ
NG
NO
OM
PK
PA
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
FI
FR
DE
GB
GR
18
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 19
Troubleshooting
CAUSE
CORRECTION
PROBLEM
No power
No picture
Plug the power cord into the wall outlet securely.
Select the appropriate video input mode on the TV so the pic-
ture from the DVD Receiver appears on the TV screen.
Connect the video cables securely to both the TV and DVD
Receiver.
The power cord is disconnected.
The TV is not set to receive the DVD signal.
The video cables are not connected securely.
Select the correct input mode of the audio receiver so you can
hear the sound from the DVD receiver.
Connect the audio cables into the connection terminals cor-
rectly.
There is little or no sound
Equipment connected via the audio cable is not set to
receive DVD signal output.
The audio cables are not connected to the speakers or
receiver securely.
Replace with a new audio cable.
Clean the disc using a soft cloth with outward strokes.
Insert a disc
The audio cables are damaged.
The disc is dirty.
No disc is inserted.
The DVD picture quality is poor
A DVD/CD will not play
Insert a playable disc (check the disc type, colour system
and regional code).
An unplayable disc is inserted.
Place the disc with the label or printed side facing
upwards.
The disc is inserted upside down.
Press SETUP to close the menu screen.
Enter your password or change the rating level.
The menu is open on screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
Clean the disc using a soft cloth with outward strokes.
Move DVD receiver and audio components further away from
your TV.
Humming noise heard while a
DVD or CD is playing
The disc is dirty.
The DVD receiver is located too close to the TV, causing feed-
back.
Check the antenna connection and adjust its position.
Attach an external aerial if necessary.
Radio stations can’t be tuned in
properly
The antenna is positioned or connected poorly.
Tune to the station manually.
Preset some radio stations, see page 15 for details.
The signal strength of the radio station is too weak.
No stations have been preset or preset stations have
been.cleared(when tuning by scanning preset channels).
The remote is not pointed directly at the DVD receiver.
The remote is too far from the DVD receiver.
There is an obstacle in the path between the remote control
and the unit.
The remote control doesn’t
work well / at all
Point the remote directly at the unit.
Use the remote within 23 feet (7m) of the DVD receiver.
Remove the obstacle.
Replace the batteries with new ones.
The batteries in the remote control are flat.
19
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 20
About the
Symbol Display
Types of Playable Discs
“
” may appear on your TV display during operation and indicates that the
Logo
Type
function explained in this owner’s manual is not available on that specific DVD
video disc.
DVD-VIDEO: Discs such as movies that can
be purchased or rented.
Regional Codes
DVD-R: Video mode and finalized only
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
DVD-RW: Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
•
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
•
DVD+R: Video mode only
Supports the double layer disc also
Copyrights
DVD+RW: Video mode only
Video CD (VCD/SVCD):
Audio CD:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
This unit plays DVD R/RW and CD-R/RW that contains audio titles,
DivX, MP3,WMA and/or JPEG files. Some DVD RW/DVD R or CD-
RW/CD-R cannot be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of the recording
device and authoring software.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI licensing LLC.
20
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 21
Specifications
General
Power supply
Power consumption
Net Weight
Refer to main label.
Refer to main label.
3.9 kg
External dimensions (W x H x D)
Operating conditions Temperature
430 x 73 x 305 mm
5°C to 35°C,
Operation status: Horizontal
5% to 85%
Semiconductor laser,
wavelength 650 nm
Operating humidity
Laser
Tuner FM/AM [MW]
FM Tuning Range
FM Intermediate Frequency
AM Tuning Range
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
522 - 1,620 kHz or 520 - 1,720 kHz
AM Intermediate Frequency 450 kHz
Amplifier
Stereo mode
155 W + 155 W (4Ω at 1 kHz, THD 10 %)
Surround mode Front:
155 W + 155 W (THD 10 %) C e n t e r * : 155 W
Surround*: 155 W + 155 W
(4Ω at 1 kHz, THD 10 %)
Subwoofer*: 225 W (3Ω at 30 Hz, THD 10 %)
Speakers
Front/Rear
Speaker
Center
speaker
Passive
Subwoofer
Type
2 Way 3 Speaker 2 Way 3 Speaker 1Way1Speaker
Impedance
4 Ω
4 Ω
3 Ω
Rated Input Power
Max. Input Power
155 W
310 W
155 W
310 W
225 W
450 W
Net Dimensions (W x H x D) 280 x 1200 x 280 mm 330 x 110 x 95 mm 182 x 416 x 414 mm
Net Weight 4.5 kg 1.6 kg 8.2 kg
Designs and specifications are subject to change without
prior notice.
21
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 22
22
|